How to Install Roll Roof

It's not a substitute for shingles but is a good option when it comes to functional structures like patios, sheds and three-season rooms. Roll roofing is also an easy and quick way to cover your roof.

Remove any loose nails and thoroughly clean the surface of the roof before beginning installation. Then, nail the drip edge in place by applying roofing cement.

Materials

It's not just for any roof. Rolled roofing works best with smaller, more functional structures, such as patios, sheds, garages, and gazebos. This is also an excellent choice for outdoor exercise structures, barns and children's treehouses.

Start by laying a layer underlayment over the roof. The roof should be clean and free of debris, gravel and old residues from an older roof. As you go along, you'll need more underlayment.

After the underlayment has been installed, apply a thin layer of roofing adhesive. The roofing cement helps the rolled roof adhere to the surface. It's now time to add a cap sheet. The cap sheet is a sticky piece that covers the roof in a variety of colors. The cap sheet must overhang the drip edge by a few inch. Nail it every 3 inches in order to keep it in position and stop water from running under the roll roof.

You can also find out more about

It is easier and faster to install roll roofing than shingle roofing. This is also cheaper than composite shingles, and it's ideal for those with little or no roofing experience. You should consult a professional to ensure that the project is safe and accurate.

Cut the first piece of roofing into the desired size using a utility knife. Lay it out, aligning the edges. Stretch the length of the roofing to prevent wrinkles. The first layer should overlap the previous by 4 to 6 inch. Hammer nails every 10 inches across the roof.

Repeat the process with each row of roofing. It is important to overlap rows by a couple of inches in order to prevent rain from seeping between sheets. To seal the roofing in place, brush roofing cement liberally on each row. Fill any gaps on the roof with roofing cement.

Layout

The roll roofing option is popular for both commercial and residential buildings, due to its affordability and ease of use. It is not as durable and has a shorter life span than other roof types.

The small rock-granules in this type of roofing give it a bumpy appearance. This type of roofing is often used on low-sloped rooftops and can be combined with other materials such as shingles.

Roofing cement is usually used to secure the rolled roofing, but it can be fixed with nails. Synthetic underlayment is recommended as it can provide an additional layer of protection to the roof.

As roll roofing is less attractive than shingles, homeowners associations may limit its use for habitable structures in gated communities. It is an excellent option for outbuildings such as sheds, garages and barns. This is also an affordable alternative to a primary roof.

Installation

It is not suitable for all roofs and can wear out faster than other roofing types. It's an affordable and quick option to re-roof a garage or shed.

Remove any debris, such as leaves or sticks. Install an underlayment layer to create a solid foundation for the new roof.

Brush liberal amounts of roofing cement on the surface of your rolled roof. This will prevent moisture from becoming trapped between the roof decking and the roofing material.

Position the first piece of roofing along the chalkline you just made. Nail down the second strip after it has been overlapped by a few ins. Continue this way, by overlapping each row about a quarter-inch and nailing them down every three inches. Cover each nail hole as necessary with additional cement.

Flat Roof Company

https://flatroofscompany.com

roofing baltimore md

roofing baltimore

roofers in baltimore

It's not a substitute for shingles but is a good option when it comes to functional structures like patios, sheds and three-season rooms. Roll roofing is also an easy and quick way to cover your roof. Remove any loose nails and thoroughly clean the surface of the roof before beginning installation. Then, nail the drip…